Video doorbell

We have a eufy and it lags by about 10 to 20 seconds. The person is usually gone before you get to see who it is never mind answer.
We had a ring a couple of years ago and it was the same.
Its so bad now we dont even bother trying to use the app real time. We just use it to see who called earlier and thats it.
 
I wired my blink doorbell into the existing doorbell wires very easy job.
Correct me if Im wrong, but your saying you connected your battery operated blink doorbell to the existing doorbell wires?
If so, can you advise please, I really need to do this?

Or you got a wired Blink doorbell?
 
but your saying you connected your battery operated blink doorbell to the existing doorbell wires?
I don't think that that's what @Wandering_Dazed was referring to. It sounds like they have a Blink unit that can be powered from the existing bell wiring (24V AC)? E.g. something like this:
 
I don't think that that's what @Wandering_Dazed was referring to. It sounds like they have a Blink unit that can be powered from the existing bell wiring (24V AC)? E.g. something like this:
Probably not what he means, just want to make sure as I know its possible with a bit of soldering... plenty of vids on Youtube converting battery operated devices to plug in devices...
 
plenty of vids on Youtube converting battery operated devices to plug in devices...
If you're just looking to power it to eliminate the need to change batteries you'd just need to solder wires from a power supply to the correct terminals. Alternatively, if they still use standard battery cells, you can get dummies (example) with wires attached to save soldering.
 
If you're just looking to power it to eliminate the need to change batteries you'd just need to solder wires from a power supply to the correct terminals
Are you sure about that in the general case? E.g. the battery operated Blink unit uses 2 x 1.5V AA batteries in series so 3V DC total.
Doorbell wiring is up to 24V AC. How can just wiring the battery operated unit in work without a suitable transformer?
 
I don't think that that's what @Wandering_Dazed was referring to. It sounds like they have a Blink unit that can be powered from the existing bell wiring (24V AC)
Thanks @ClubMan the link you shared is correct.

If you have an existing "electric" doorbell installation you can wire the Blink doorbell into that and it helps extend the battery life. No soldering required.

Here is the v2 installation guide which mentions extended battery life:

 
Doorbell wiring is up to 24V AC. How can just wiring the battery operated unit in work without a suitable transformer?
I would assume using something like this:
 
If you have an existing "electric" doorbell installation you can wire the Blink doorbell into that and it helps extend the battery life. No soldering required.
What do they mean extending battery life? Its wired in?
Note, you have to buy the wired version of the Blink doorbell, not the battery one.. Bit confusing when they say the wired one extends the battery life..
 
Last edited:
Doorbell wiring is up to 24V AC. How can just wiring the battery operated unit in work without a suitable transformer?
Oh, I should have been clearer, I meant wiring from a fully separate power supply - I assumed @Colin4444's reference to converting battery devices to wired was where there was no wiring at all in place. For most of the smart doorbells there are already guides on how to connect to existing powered doorbell wiring.
 
For most of the smart doorbells there are already guides on how to connect to existing powered doorbell wiring.
But this is for a wired doorbell.

What I was asking was for a battery operated smart doorbell to be wired into the existing doorbell wiring, which Im sure is possible with a bit of tinkering.. but from what Im gathering probably not worth it.. best buy a wired smart doorbell as you wont have to tinker with voltage..
 
What I was asking was for a battery operated smart doorbell to be wired into the existing doorbell wiring, which Im sure is possible with a bit of tinkering..
Yeah, I get that alright, not as straightforward. All depends on what's in place. Most newer houses with bells installed at build are run from a 24 transformer in the consumer unit, but some others install a bell later and that chime box is often fed by mains where you could accommodate a ac-dc converter, and mains AC to DC converters are ubiquitous.
 
Back
Top