planning application scales

D

Dopey1

Registered User
Messages
22
Hi could anybody offer any advice, we are putting in planning application for retention, using plans that were drawn up by the architect when
we built the house. I am going to get these printed off in A3 and just wondering, On the plans the scale is 1:100 but I see on the council website,
site layout etc and elevations can not be any smaller than 1:200 and 1:500. Will I need to get them adjusted before printing. Sorry if it sounds
like I don't know what I am talking about but just a bit confused.
 
1:100 is a larger scale than 1:200/1:500.

Just be careful when you copy the drawings that they are actually 1:100, i.e. if they are correct 1:100 scale at A4 then they won't be 1:100 at A3. If they are 1:100 at A0 then changing to A3 will throw the scale off completely and your application will likely be invalidated.
 
You must log in or register to reply here.
Back
Top