Don't worry Jason 77, I've been there twice! Integrated dishwashers are notoriously tricky to fit, especially if walls/ floors are anywaly off. The problem with them is there's very little room for error, there's no tolerance (only about 5mm on the width). Lower feet first and slide unit into position (be sure to stick anti- condensation strip onto underside of counter first.), it will probably be a tight fit, widthwise. Then gradually adjust legs (start with back 2 first) until unit is snug to underside of counter. Even with the best levelling in the world the kitchen door face may not line up exactly with the neighbouring cabinet doors. It took me a couple of hours to get mine just right.