Hopefully, someone may be able to help.
I was away for weekend with my heating timer set to on for just a couple of hours a day.
When i returned the breaker on my circuit board for the boiler circuit had switched.There may have been a power cut over the weekend.
On resetting, my circulation pump appears to have power and my boiler has power going in but no Mains or Burner Lights are illuminated.
Following the wires it looks like the power should come into boiler go through Thermostat switch and then is in series with Mains light on boiler.
With this setup and after some reading up and i think my thermostat is either goosed or limit switch needs resetting.
Before i go down the road of replacing the thermostat can anyone suggest where the limit reset switch is for this thermostat.
I have removed the knob, and removed the thermostat 'unit' from the front panel (left wires connected), but for the life of me i cant find any kind of reset switch.
Thanks in advance for any assistance.
gLo.
I was away for weekend with my heating timer set to on for just a couple of hours a day.
When i returned the breaker on my circuit board for the boiler circuit had switched.There may have been a power cut over the weekend.
On resetting, my circulation pump appears to have power and my boiler has power going in but no Mains or Burner Lights are illuminated.
Following the wires it looks like the power should come into boiler go through Thermostat switch and then is in series with Mains light on boiler.
With this setup and after some reading up and i think my thermostat is either goosed or limit switch needs resetting.
Before i go down the road of replacing the thermostat can anyone suggest where the limit reset switch is for this thermostat.
I have removed the knob, and removed the thermostat 'unit' from the front panel (left wires connected), but for the life of me i cant find any kind of reset switch.
Thanks in advance for any assistance.
gLo.