i never moved the tap at all and it only malfunctioned yesterdayAre you sure it's drawing water ok? Have you checked the connections and that the "tap" on the hose feeding the water is in the open position? Probably something simple.
filter for water in?have you checked / cleaned the filter ?
Its most likely that your machine is blocked by coins , hair bands / other foreign objects.
This happens reguarly to all washing machines .
The problem may lie in the enclosed unit at the back where water empties .
To fix problem , you may not need to open the enclosed unit , but just remove clip at each side and remove any foreign objects ........
how would being blocked in the lower side stop it filling?
blockages are more likely in the filter on the bottom right on the front.. it might be behind a clip on panel..
oh i see 'scuse my ignorance i did not know that would stop it drawing in any more. I am gettiing a friend to look at it tomorrow. Thanks alli'm guessing it's because if the drum is full of water that it can't empty, the machine won't draw in any more water.
Thanks all, there was something caught in it alright. Free now. Happy new year all
I'll have 4 guesses ::>
- Coin
- Hair band
- pin
- Wire from Bra
I have a small door where the pump is on my machine, bottom right hand corner of front panel. Open unscrew the top and it was there.Would be grateful if you would let us know if blockage was :
- front
- back
- Inside a panel
- outside a panel
blockages are more likely in the filter on the bottom right on the front.. It might be behind a clip on panel..
+1go on the chrisboy!!
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?