Washing Bathroom wall tiles

[Passport1]

Every time we wash the tiles in the bathroom (not just within the shower area) but all the wall tiles in bathroom we always seem to be left with water marks/droplets on them

This seems to happen regardless what cloth we use – J cloth, flannel etc

We just using hot water with bit wash up liquid to wash the tiles

Anyone got any advise on we could do to ensure we don’t get these droplets/water mark residue appearing on the tiles are we wash them

Same with those cleaning products that you buy. When use them and wash them off and rinse them tiles clean but left with water marks/droplets

We tried even using a towel to dry the tiles after washing and that worked to some extend but not fully

Thoughts?

Thanks

 

[noproblem]

My Mum uses to use a couple of tablespoons of Bread soda and a couple of white vinegar in some tepid water, then gave the area a good sponging,but she never rinsed anything off with water. Kills germs and left walls/area with lovely sheen and smell.

 

[Monbretia]

I found the only way to get a perfect finish was to then polish them when dry with something like Mr. Sheen or similar but to be honest I don't do that anymore, life is too short for polishing tiles

 

[G7979]

I use a window washing kit, quick and easy - limits the streaks but not perfect with the grout gap in tiles, I also squeegee (sp?) the shower door