shower issue

[rustbucket]

Hi All

Have a Mira Electric Shower. Relatively new. Only installed 18 months ago (along with a whole new central heating and water system)

Have noticed over the last 3-4 months that the temperature of the shower is not great.

The pressure is grand- we havn't been affected by water pressure reduction or cut offs etc.

The temp gauge is almost at max and the shower is never really that hot.

However, when you put it up to max it is scalding for a few seconds, then goes cold, then back to scalding.

Any other setting is just luke warm.

Can the thermostat be adjusted internally?

Any suggestions?

 

[pudds]

Hi rustbucket,

you might be better posting this over on the boards.ie as you will get a much quicker responce than you might get here.


http://www.boards.ie/vbulletin/forumdisplay.php?f=1320

 

[rustbucket]

Thanks Pudds. Will try that

 

[serotoninsid]

Have you cleaned the shower head and the filter inside the shower assembly?

Do you have problems with hard water?