Also, if it was me (and there isn't more to the system that we are not aware of).
I'd turn the zone on the boiler (controlled by this programmable thermostat) to be on all the time, and use the programmable thermostat solely to control the heating.
After all, that is what they are for - allowing you to set individual tempretures for different time slots.
Because in the scenario that you have described, the boiler and the stat are in opposition. The boiler is off (timed - set by you), but you have set the thermostat to ask for heat (the room is lower than the tempreture you have set - hence the flame symbol).
This will become more apparent as the weather gets colder. For example, if you have set the room to be 19 degrees, and it is currently 10 degrees, the flame symbol will (correctly) appear, and the thermostat is saying "gimme heat". But if the boiler is off (timer is set to off), then no heat is going happen, to heat the room to the tempreture that you have set.
I haven't tried the heating since it was installed a couple of months ago. The programmer has a hot water setting and two heating zone settings. The hot water setting works fine. None of the settings are on auto; all set at ON. I will try and raise the room temperature as you suggest and see what happens. Boost buttons are on also.Did it ever work?
The temp on the programmer is irrelevant, its just room temp,
the 19.3 I believe is the current room temp so it wont change till u get heat.
Its a stat so just to test it why not GENTLY blow some hot air from a hairdryer across the room stat and see if it changes
What setting is under the tap and rad symbol on the programmer, is it on auto
Try the boost buttons
My eph controllers not showing room temp. It blank on the control panel !! The heating comes on but stays on as long as it is timed sitting room was 26 degrees as it doesn't switch off when the room reaches the selected temp. Had the plumber out and he said its the WiFi anyone else have this problem ??
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?