Go Back   Askaboutmoney.com > Don't Askaboutmoney > Sites, planning, self-builds and extensions

Notices

Reply
 
Thread Tools
  #1  
Old 14-06-2010, 02:43 PM
Jimmy2010
 
Posts: n/a
Default Price difference between Concrete Slab and Suspended Timber Floor

Hi All,

Currently applying for planning permission for a 270m2 two storey house in cork. However, not 100% on whether to go with a concrete slab first floor or a suspended timber first floor. Concrete slab would be more expensive but how much more per m2?? Total area of first floor would be 125m2. Also, what are the main advantages/disadvantages of having a concrete slab first floor rather than a timber floor?? Any info would be much appreciated.
Reply With Quote
  #2  
Old 15-06-2010, 08:32 AM
bluemac bluemac is offline
Frequent Poster
 
Posts: 286
Default

Just half way though my build went for slab.
1st point slab can be made in advance once build starts and installed the next day the brickies have got to first floor level (leave it over weekend iff poss) and takes about a half day so builder can get on a day later (remember you have to join the slabs with poured concrete in the gaps no one told me this and it was hard work to get it up there and in)

The slabs are good for fire and sound proofing, one of the family has wood one has slab and the one with slab the house is very quite the one with wood wises she had slab.

Rememebr you also need a suspended cealing metal system under it ( dont lat it with wood it doesnt work well and is more expenisve) metal system is a diy job at about 500 will cover it all.


so for my house 14m by 14m slabs were 6k 500 for metal and 500 for concrete 7k if your not doing it yourself 10K

I recon timber and wood workers to get it to same stage as above 5k

so its double the price by the time you finish but the fire safty thing for me is key as I look at the house now and theres nothing that will burn really...
Reply With Quote
  #3  
Old 15-06-2010, 09:39 AM
Jimmy2010
 
Posts: n/a
Default

Thanks very much Bluemac. Ur help very much appreciated!!!
Reply With Quote
  #4  
Old 16-06-2010, 12:32 AM
kbie kbie is offline
Frequent Poster
 
Posts: 182
Default

Have timber and sorry I did not go for slab mainly because every sound is heard downstairs, footsteps, toilets flushing, music etc. If you can spend the extra I would advise slabs. I regret I was not aware of the choice at the time.
Reply With Quote
  #5  
Old 16-06-2010, 09:32 AM
Claire1956 Claire1956 is offline
Frequent Poster
 
Posts: 105
Default

We put in a timber floor that had the engineered trusses made for us by a Carlow Co. Approx 2000sq feet and cost was €4k or so. It is completely squeak free compared to what a 'carpenter would have put in' (this is hearsay BTW, suppose it depends on his attention to making it squeak free). Double slabbed the kitchen/living room to reduce noise as that will be the busiest room in house and used thicker ply upstairs, plus for insulation (there is six inches of it in the ceiling/first floor). Does this come by default with the concrete?

Reason we didn't go concrete was just a personal dislike of it.

One benefit is that you don't have to use extra materials in the foundation, which apparently has to be done if using concrete in upstairs floor. Plus it is nice sensation underfoot compared to concrete. However the costs in the foundation are probably offset by the costs of the ply etc with the timber.

Very satisfied with it too, gives me the sense that the house has an older country feel as opposed to mass concrete. Have always lived in houses with timber floors and never found the noise an issue when done correctly.
Reply With Quote
  #6  
Old 24-06-2010, 06:40 AM
Froggie Froggie is offline
Frequent Poster
 
Posts: 197
Default

I lived in a 2 storey with timber floors for 11 years, I put the concrete floors into my current house.

The reduction in noise carryover from upstairs is fantastic. We used to think that the kids were trying to drive us mad by rolling coins from one side of their bedrooms to the other, the floors were varnished with no carpet though. With the concrete floors I can crank up the volume on my home cinema system even when my wife is in bed in the room overhead and it doesnt bother her. I have a much better relationship with my kids too.

I cross battened the ceilings with 2x1 timber using a hilti gun. If I was doing it again I would pay a contractor to fit a metal system.
__________________
AKA MACNAB
Reply With Quote
  #7  
Old 24-06-2010, 02:09 PM
clonboy clonboy is offline
Frequent Poster
 
Posts: 421
Default

i also use the clab and metal ceiling battens.. but one more cost i found out was having to get a person in to drill thru the cslab for the benefit of the waste pipes and the rad pipes.

waste of time trying to do it urself, slab is 6 inches and 3 inch scredd on tip of that,, one guy drill all my holes in little over half a day for 400 euro
Reply With Quote
  #8  
Old 25-06-2010, 10:19 AM
RKQ RKQ is offline
Frequent Poster
 
Location: Sunny south eas
Posts: 234
Default

The structure must be engineered to support concrete slabs.
This usually means installing steel beams as lintels over external & some internal opes. It can mean increased foundation costs, block work costs etc.
A 225mm solid internal wall will be required where slabs join. The internal leaf of a cavity wall may need to be incresed in width. Retain a Structural Engineer for advice & calculations.

It is possible to soundproof a timber floor. Insulation, double-slabbing etc can be quite effective.
Reply With Quote
  #9  
Old 03-07-2010, 09:30 PM
changes changes is offline
Frequent Poster
 
Posts: 120
Default

OP What did you decide on in the end up?
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 04:20 AM.